Spray Dried Nutrients

Spray Drying Technology

At Watson we are continually looking at new and better ways to use spray drying to produce high quality products for the food, beverage, and dietary supplement industries. The small research and development spray dryer shown above is located in one of our pilot rooms in our West Haven facilities. This is generally where new projects start and customer samples are developed.

Watson produces a full line of industry standard spray dried ingredients. We also feel strongly that customized approaches can often yield the best performance in the end product. For this reason roughly half of the spray dried products we manufacture are custom products and made for a singular product application.

What is a Spray Dryer?

A spray dryer, such as the one pictured above, is used to dry a product quickly. Spray driers are very effective; in a single step they can turn a solution into a dried powder. Dry powders are often easier to handle in production. This also allows ingredients that would otherwise be liquids to be incorporated into dry powder blends such as premixes. The resulting powders formed from the spray drying process are free flowing and easy to handle and scale.

A spray drier works by separating the solids from a liquid through evaporation. To do this a liquid is sprayed through a nozzle into a hot vapor stream. The solids form from the liquid as the moisture leaves the droplets. The solid is collected as it passes through the outlet.


Laboratory-scale spray dryer.
A=Solution or suspension to be dried in
B=Atomization gas in
1=Drying gas in
2=Heating of drying gas
3=Spraying of solution or suspension
4=Drying chamber
5=Part between drying chamber and cyclone
7=Drying gas is taken away
8=Collection vessel of product, arrows mean that this is co-current lab-spraydryer

What is Spray Drying Microencapsulation?

Spray drying for microencapsulation is very different then the fluidize bed processes. In spray drying for encapsulation we change a liquid into a powder form. The process starts with an emulsion or dispersion.

Unlike the fluidize bed methods spray drying does not produce a full microencapsulation; we are not building a shell or matrix on the outside of the particle. Instead, in the spray drying process, we are creating a dispersion or emulsion of an ingredient within another ingredient and then drying this emulsion very quickly. On the outside edges of the resulting dry particles there will always be some of the active component or active ingredient. The inside core is much more protected. Examples for spray drying applications include the fat soluble vitamins such as vitamin A, vitamin D, and vitamin E. When spray dried these vitamins are much more stable for shelf life, however there will always be some amount of surface oil.

Key points of difference in the process of spray drying for encapsulation:

  • Spray drying process turns liquids into powders
  • Spray drying starts with an emulsion or dispersion
  • Spray dried materials are not fully encapsulated

Examples of spray drying for encapsulation:

  • Fat soluble vitamins
  • Healthy lipids

Benefits of spray drying for encapsulation:

  • Results in free flowing powers
  • Stabilized for shelf life

Beta Carotene

Innovation in Spray Drying Technology

In spray drying you can have huge functionality changes depending on how you make up the emulsions.

In the image above we took spray dried beta carotene made by three different methods. We dissolved each in water to simulate a beverage application. Each of the bottles above contain 25% of the DV (daily value) for vitamin A. Each was made from the same beta carotene starting material. But their appearance is very different.

Vitamin A’s most common forms are vitamin A acetate and vitamin A palmitate. The third most common is beta-carotene. Beta-carotene is great because people see it as a nature identical source of vitamin A. Your body only converts the amount of vitamin A you need from beta-carotene. Unlike other forms of vitamin A, it does not store in the liver. Instead, your body stores vitamin A in your skin cells. This makes beta-carotene a very safe way of delivering vitamin A without concerns for toxicity.

The problem with beta-carotene in many applications is its color. Similar to carrots, which are rich in beta-carotene, it is bright orange. The intense color can make it difficult to use in formulations of foods, beverages, and dietary supplements. Beta-carotene is also less stable than other forms of vitamin A.

Cloudy Appearance

Typical Emulsion

The image above is an illustration of a typical emulsion that might be spray dried. The particles would be in the 0.5 to 1 micron range. You have multiple particles that are encapsulated in one beadlet of matrix. In this example we are using beta carotene. If this emulsion were spray dried the powder could be used in an application like an orange colored beverage. In that application the color impact would not be a problem.

What is a typical emulsion?

  • Particle size range: 0.5 to 1 micron
  • Multiple particles encapsulated into one matrix

When the resulting spray dried power from this emulsion was dissolved into water the result would be similar to the bottle on the far left. There would be a strong color and some cloudiness.

Colorant and Vitamin A Source

Micellular Dispersions

At Watson we can change the emulsion system so that in turn it changes the appearance of the finished product. In the illustration above we are showing a micellular dispersion. A micellular dispersion is a single particle delivered in a larger matrix.

What is a typical micellular dispersion?

  • Particle size range: 50 to 100 nm
  • Single particle in a larger matrix

The result is an optically clear solution with no cloudiness. If the spray dried material were dissolved in water, the result would be similar to the bottle on the far right. You can see there is still color contribution but the solution is much clearer.

Vitamin E

The bottles above are another example of how appearance in the finished product can be changed based on the preparation of the emulsion in spray drying. The bottle to the left has a solution of 15% DV vitamin E made by traditional spray drying methods using a standard emulsion. The bottle to the right was made by creating a micellar dispersion of vitamin E prior to spray drying. As a result when the powder is dissolved into water the solution is optically clear. The solution in both bottles contains 15% of the daily value of vitamin E.

Reduced Color Vitamin A Colloidal Dispersion

Colloidal Dispersions:

A good example of innovation in spray drying is our BetaClear™ beta-carotene.   The illustration above shows a colloidal dispersion. When spray dried this colloidal dispersion will result in a dramatically different appearance in the finished product. There will be significantly less color contribution.

The colloidal dispersion almost tricks the eye in a way because it is light scattering.

What is a typical colloidal dispersion?

  • Single particle
  • Light scattering

In the picture of the three bottles, each contains 25% of the daily value (DV) for vitamin A.

If dissolved into solution the spray dried colloidal dispersion would be similar to the center bottle. The solution would be clear and there would be minimal color contribution.

Applications for BetaClear™ include beverages, powder blends, and tablets.


Spray Drying Process in the Food and Supplement Industries

A growing number of consumer products are being fortified to help deliver essential vitamins and minerals to the end user. Companies must determine the optimal way to deliver the recommended daily allowance (RDA) for that nutrient.

Premixes are one of the ways that companies like Watson are able to deliver the nutrient profile a consumer desires. Since many functional food ingredients can compose a product, processing technology must be looked at as well.

Typically, blending is utilized to make a premix but other alternatives—spray drying, agglomeration, encapsulation, and roll compaction—also exist and can be used to create a homogenous premix blend. The spray drying process takes a liquid slurry and, under a temperature differential, removes the moisture giving a dried powder.

Factors Affecting Spray Drying

Spray Drying Parameters

There are several spray drying parameters that must be considered when selecting the optimal method to produce your dry powder.

Determine product moisture and particle size requirement as these can impact atomizer choice. For example, an atomizer wheel will give you a wider distribution of particle size while a nozzle will give you narrower distribution.

Selecting the right atomizer can also impact your product color as particle size and color are intertwined. Furthermore, if a nozzle is chosen, whether the nozzle is being used as part of a co-current flow or counter-current flow is another variable to consider as residence time in the dryer and particle size of the powder are impacted.

Another factor is order of addition. Order of addition of raw materials can impact the viability of the emulsion or solution to be spray dried. Slurry temperature can also impact the viscosity of the material to be pumped. These are just some of the basic variables to look at when evaluating spray drying as a means to produce your powder.

Toll Manufacturing:

Do you have an active or raw material you would like spray dried? Watson provides toll manufacturing services. Work with our research and development team to define your project. You provide the active or raw material and we can create the value added product with the physical specifications you define.   Depending on your goals, you can select from options such as having your product assayed by our in-house lab, pre-shipment samples sent to a third party laboratory of your choice or your laboratory for testing. Private label options and drop shipments are also available.

Expertise: Watson is one of the most innovative spray drying companies

Watson utilizes various carriers in the spray drying process to suit the properties of your finished product, taking into consideration desired characteristics such as solubility, particle size, and special label claims. A full breadth of our spray dried products is located here.


You may also be interested in learning more about these Watson technologies: